MC 100 EVO
MC 100 EVO
D-DRIVE (Diesel-direct)
855 mm x 530 mm x 320 mm
220 t/h
The smallest mobile jaw crusher of the EVO line impresses with its compactness and reliability. Can be used for the most varied of applications, it offers wide-ranging possibilities for both demolition companies and contract crushing companies. Thanks to the D-DRIVE diesel-direct drive, the MC 100 EVO is economical in consumption.
- Continuous Feed System (CFS) for optimum crusher loading
- Innovative crusher unblocking system for extremely short downtimes
- Efficient and powerful D-DRIVE diesel direct drive
- Simple control with menu-guided touch panel
Technologies
Innovative diesel-direct electric drive concept - impressive performance with the best possible consumption values
An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.
Continuous Feed System (CFS)
Uniform loading is indispensable for a good product, optimum throughput and low wear.
To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).
Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.
The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.
Effective prescreening - better results and less wear
For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.
Jaw crusher
Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.
Technical specifications
Feeding unit
Max. feed size
855 mm x 530 mm x 320 mm
Feeding height
3,200 mm
Feed height with extension
3,720 mm
Feed capacity up to approx.
220 t/h
Hopper width
1,900 mm
Hopper width with extension
2,780 mm
Hopper length
3,000 mm
Hopper length with extension
2,800 mm
Hopper volume
3.2 m3
Hopper volume with extension
7.1 m3
Vibrating feeder
Width x length
870 mm x 3,940 mm
Side discharge conveyor
Discharge height
2,110 mm
Discharge height, extended
3,000 mm
Width
500 mm
Length
2,700 mm
Length, extended
5,000 mm
Crusher
Crusher drive type
Direct
Crusher inlet (W x D)
950 mm x 550 mm
Crusher weight (approx.)
12,000 kg
Crushing power
160 kW
Single toggle jaw crusher model
STR95-055
Gap setting
Fully hydraulic
Adjustment range of gap width
20 mm - 130 mm
Crushing capacity
Crushing capacity CSS = 60 mm up to approx.
105 t/h
Crushing capacity CSS = 85 mm up to approx.
150 t/h
Crusher discharge conveyor
Discharge height approx.
3,050 mm
Discharge height, extended approx.
3,660 mm
Width
1,000 mm
Length
8,600 mm
Length, extended
10,100 mm
Power supply unit
Drive concept
D-DRIVE (Diesel-direct)
Generator
85 kVA
Power pack manufacturer
Deutz
Power supply unit output
165 kW
Rated speed
1,500 U/min
Transport
Transport height approx. (default value)
3,200 mm
Transport length approx.
12,965 mm
Transport width approx.
3,000 mm
Transport weight of basic plant approx.
31,000 kg
Transport weight max. configuration approx.
38,500 kg
Contact us for quotes and prices!
All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.