MCO 110 PRO
MCO 110 PRO
E-DRIVE (Diesel-electric)
240 mm
470 t/h
The MOBICONE MCO 110 PRO mobile cone crusher stands out thanks to its extremely robust design and impressive performance. As an option, the plant can be operated using an external power source and it requires impressively little maintenance.
- Extremely robust design
- Very high production output with low-maintenance operation
- E-DRIVE Diesel-electric drive concept with the option to connect an external power supply
- Ideal for combination with upstream MOBICAT MC 120 PRO jaw crusher
Technologies
Intuitive control concept SPECTIVE - for simple operation
The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the ground.
SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localisation, the description and remedy tips result in reduced downtimes. The 12″ touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen or gloves.
Continuous Feed System (CFS)
Uniform loading is indispensable for a good product, optimum throughput and low wear.
To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilisation (impact crusher).
Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilisation is optimised. When the crushing chamber is free again after overloading, material transport is continued without a delay.
The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.
Innovative diesel-electric drive concept - impressive performance with the best possible consumption values
The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.
Ring Bounce Detection
During ring bounce, a movement is created between the bowl and the main frame of the cone crusher as a result of excessive crushing forces. This is triggered by feed sizes that are too large or small, an excessive fine content or the continuous feeding of uncrushable material.
To protect the crusher, software continuously monitors the hydraulic pressure of the crusher overload system and reacts when necessary with two modes:
Mode 1 – PRECISE MODE
for the production of grit: the machine stops feeding if ring bounce is detected; the operator receives a fault message and can adapt his process. This mode assures that no impermissible oversize grain is produced and the machine is protected against crusher damage
Mode 2 – MIXTURE MODE
for the production of mixtures: in this mode, the machine adjusts the crushing gap – without intervention of the operator – automatically to prevent ring bounce. After a defined period without ring bounce, the gap is closed again to keep the share of oversize grain as low as possible
Technical specifications
Feeding unit
Feeding conveyor
Crusher
Crushing capacity
Crusher discharge conveyor
Power supply unit
Transport
Contact us for quotes and prices!
All details, illustrations and texts are non-binding and may include special equipment. We reserve the right to make technical changes without prior notice. Performance data are dependent upon actual operational conditions.